Solar energy

Product Category

Solar Energy


Category: Solar Energy

TYN1100 Series Brief:

TYN1100 series solar inverter is a single-phase inverter, which ranges from 6KVA to 20KVA, This inverter is a multifunctional intelligent power supply, which consists of an MPPT solar controller, charger, rectifier, inverter, static transfer switch, main control circuit, and display alarming circuit. It can set different inverter work modes according to users’ actual applications.

Get A Quote

Two Work Mode:

1. PV—Grid—Battery: This series solar inverter is designed for real-time sharing function between solar power and utility power. Solar power priority, solar power supplies power to the inverter via MPPT controller and then outputs pure sine wave AC power to load via an inverter, meanwhile charge the battery. When solar power is not enough, the utility power will supply power to load. In this way, we can maximum use solar power and utility power, reduce battery discharge time and extend battery lifespan.

2. PV-Battery-Grid ( Maximum use solar power under the stable environment of utility power ): Solar power supply power to the inverter via MPPT controller, and then output pure sine wave AC power to load via an inverter, meanwhile charge battery. When the solar power is not enough, to maximum use solar power, the battery will supply power to load. When the battery is discharged to a value, the utility power will supply power to load. The users can maximum use solar power, reduce grid power supply, and save electricity.

Main Feature:

High-efficiency IGBT (Insulated Gate Bipolar Transistor)inverter technology: the 6th generation IGBT has the nature of lower saturation voltage drop, higher efficiency of the inverter, lower heat, more reliability.

Instinctive LED status display, work status can be seen at a glance by workflow indicator.

Perfect protection function:  Input/output over/low voltage protection, input surge protection, phase protection, battery overcharge-over discharge protection, output overload shortcut protection, overheat protection, and alerting.

Two charging modes: AC charging mode and solar charging mode, solar charging priority. Can choose AC charging current 0A-3A-6A by panel switch

Can choose two work mode:  Solar-Grid-Battery, Solar –battery-Grid, Can choose it by the LCD screen

Solar power & Grid power priority (when battery voltage is 11.2v, low voltage, and power off), Under no grid power, solar power is normal, it can automatically restart the inverter (single-cell voltage 12.5v automatic restart)

Intelligent communication:  With RS232 and RS485 standard collocation, optional SNMP, and dry contact.

Selectable battery inspection module – Can test the single parameter and display on the LCD, battery failure will immediately alarm and inform the administrator.

Capacity (KVA)6kVA10kVA15kVA20kVA
Power ( Watts )4.8kW8kW12kW16kW
Grid (AC Input)
Max input current (A)376191121
TypeSingle Phase ( P+N+PE ), 220VAC
Input voltage220/230/240VAC±25%
Input frequency220/230/240VAC±25%  (100/110/120VAC is optional)
Charge voltage219V±1%
Charge current0-3A-6A Can adjust through panel switch
PV1300VDC — 400VDC (2 groups max)
PV2300VDC — 400VDC
Charge current20A max (PV1)
TypeMaintenance-free lead-acid battery (other type battery need customize )
Battery voltage192VDC
Battery capacityAccording to backup time
Battery low voltage


Inverter (Output)
Inverter output waveformPure sine wave, THD<3% (linear load)
Inverter voltage220/230/240VAC±1%(stable load), 220/230/240VAC±5% (load fluctuation), (100/110/120VAC is optional)
Dynamic featureInverter output transient dynamic range less than±5%,recovery time <20mS
Crest factor3:1
Overload protection(Inverter output)125% overload, delay 1mins protect, 150% overload, immediately protect
Inverter efficiency>90% ( 100% load )
System Parameters
Transfer time<0.5ms ( inverter–bypass )
ProtectionOutput short circuit, overload, overvoltage, under-voltage,

over temperature etc protection, have an audible and visual alarm

DisplayLCD display input and output voltage, output current, the inverter voltage, frequency, output current, battery voltage, PV voltage, PV charging current, temperature mode, flowcharts, current work status,      event record, and system information
Operating environmentTemperature 0-40℃
Relative humidity30%-95%
Work sequenceSolar-Grid-Battery or Solar –battery-Grid, Can choose one of the modes via  LCD panel
Operation altitude (


<1000 meters ( per increase 100 meters power decrease 1%, at most 4000 meters )
Computer communicate interfaceRS232/RS485
Cooling methodforced-air cooling
Size W×D×H (unit: mm)300*570*850350*600*850
Weight (kg)108146162178